See Our Current Specials • No Upsells. No Unnecessary Repairs. • Residential and Commercial • Financing Available • ★★★★★ 4.9 Stars on Google • Licensed and Insured • RMP 45090 • BPAT 0023720
Tapped Out Trades Program

Plumbing Apprenticeship Program Learned With Your Hands. Denton & North Texas.

The Tapped Out Trades Program is a four-month plumbing apprenticeship program inside a real service-plumbing company. Apprentices work alongside experienced tradespeople and are introduced to tools, professional work habits, customer interaction, jobsite awareness, troubleshooting, and hands-on plumbing.

The goal is not to make someone a plumber overnight. It is to give them a real beginning in the trade.

Plumbing apprenticeship program hands-on training at Tapped Out Plumbing in North Texas

Four Months in the Field.

The program at a glance
  1. Month1
  2. Month2
  3. Month3
  4. Month4
  5. $500 Tool AwardUpon program completion
Schedule
Monday through Friday, 8:00 AM to 5:00 PM
Pay
Paid program
Who
Applicants 18 and older
Setting
Real service calls, not a classroom-only introduction
Inside the Apprenticeship

Learn More Than How to Make a Repair.

Plumbing is more than memorizing parts or learning how to use a wrench. A service plumber has to understand how systems work, recognize symptoms, think through possible causes, work safely, communicate with customers, and know when more experience or supervision is needed.

01

Tools and Equipment

Learn what common plumbing tools and equipment are used for and why choosing the right tool matters.

  • Hand tools
  • Power tools
  • Diagnostic equipment
  • Tool care and organization
02

Understand the System

Begin learning how individual fixtures and components fit into larger plumbing systems inside a property.

  • Water distribution
  • Drain and sewer systems
  • Fixtures and valves
  • Water-heating systems
03

Think Through the Problem

See why a professional plumber investigates symptoms instead of immediately assuming what the repair should be.

  • Listen to the complaint
  • Observe the symptoms
  • Inspect before assuming
  • Understand repair decisions
04

Work Like a Professional

Technical ability is only part of service plumbing. Professional habits matter on every job.

  • Protect customer property
  • Maintain a clean work area
  • Organize tools and materials
  • Follow jobsite instructions
05

Learn to Work With People

Service plumbers work directly with customers who may be dealing with an unexpected and frustrating plumbing problem.

  • Professional communication
  • Listen before responding
  • Explain work clearly
  • Respect the customer
06

Safety and Accountability

Plumbing work carries responsibility: safety, supervision, proper procedures, and accountability.

  • Jobsite awareness
  • Follow supervision
  • Know your limitations
  • Take responsibility for your work
Apprentice learning plumbing in the Tapped Out Trades Program in North Texas
You Do Not Have to Know Everything to Start. A willingness to learn, work, listen, and improve matters more at the beginning than already knowing every answer.
Who the Apprenticeship Is For

We Can Teach Plumbing. You Have to Bring the Effort.

Someone starting a plumbing apprenticeship is not expected to already know how to diagnose every system or make every repair. What matters is how they approach the work.

Curious
You want to understand how things work and are willing to ask questions instead of pretending you already know.
Coachable
You can listen to instruction, accept correction, and apply what you were shown the next time.
Dependable
The trade depends on people showing up when they say they will and being ready to work.
Willing to Work
Plumbing can involve tools, lifting, dirty conditions, difficult access, weather, and physical work.
Respectful
Service plumbing happens inside people's homes and businesses. How you treat the customer and their property matters.
Serious About a Career
You want real time in the trade before deciding whether plumbing is something you want to pursue long term.

What We Expect From Day One

AttendanceShow up consistently
AttitudeBe ready to learn
JobsiteFollow safety and instructions
CustomersAct professionally
Where the Apprenticeship Can Lead

Four Months Is the Beginning. The Trade Is Built Over Time.

Plumbing is a career built through experience, apprenticeship, continued learning, responsibility, and meeting applicable licensing requirements. What happens after the program depends on the apprentice, their progress, applicable Texas requirements, and available career opportunities.

  1. 01

    Tapped Out Trades Program

    Four months of real service-plumbing work, tools, jobsite expectations, customer interaction, and professional work habits.

    Start in the field
  2. 02

    Apprenticeship Development

    Register as a Plumber's Apprentice with the Texas board, then keep developing under proper supervision while building experience and documented apprenticeship hours.

    Keep learning in the field
  3. 03

    Build Skills and Judgment

    Take on greater responsibility, improve technical ability, learn diagnosis, and understand more complex plumbing systems.

    Experience creates confidence
  4. 04

    Texas Licensing Path

    Work toward applicable Texas licensing milestones as you meet the requirements established for each license level.

    Licensing requires more than time
  5. 05

    Build a Plumbing Career

    Continue developing as a plumbing professional, whether an opportunity exists with Tapped Out Plumbing and Backflow or somewhere else in the trade.

    The goal is a real career

Plumbing Is a Licensed Trade

The Tapped Out Trades Program does not issue a plumbing license and does not replace requirements established by the State of Texas. Four months in the field is a starting point, not a shortcut.

The Texas State Board of Plumbing Examiners says a Plumber's Apprentice may learn about and assist with the installation of plumbing under the direct supervision of a licensed plumber. It also says you must register as a Plumber's Apprentice before you can start counting hours toward a license.

The Tapped Out Trades Program is for applicants 18 and older. Registration as a Plumber's Apprentice comes after the four-month program is completed, so program time is field experience, not license hours.

Local facts were checked against the linked sources in October 2026.

Could It Lead to a Job? Possibly.

The Trades Program is not a guarantee of employment. Apprentices who demonstrate strong attendance, reliability, professionalism, willingness to learn, and continued development may be considered for future opportunities when positions are available.

Even when employment with Tapped Out is not the next step, the goal is for you to leave with useful experience and a stronger foundation for the plumbing trade.

View Plumbing Careers
Ask About the Apprenticeship

Start With a Conversation.

You do not need to have your entire plumbing career figured out before asking questions. If the Tapped Out Trades Program sounds like something you want to explore, contact us and tell us why the plumbing trade interests you.

  • Tell us you are asking about the Trades Program
  • Include your contact information
  • Say a little about why you want to learn the trade

Two Ways to Reach the Office

The office is open Monday–Friday, 8:00 AM–5:00 PM.

Call469-826-3610 Emailoffice@tappedoutplumbingandbackflow.com
Trades Program FAQs

The Practical Questions Before You Ask to Be Considered.

Getting In

Does the program have a specific start date?

Program availability and start dates can depend on current field capacity, supervision, workload, and available openings. Contact us for the current program schedule rather than assuming enrollment is always open.

How many apprentices can take part at one time?

Program capacity may vary. Because apprentices are learning around actual plumbing work, available supervision and the ability to provide meaningful field experience matter more than filling a large class. Current availability is confirmed during the inquiry process.

What happens after I contact Tapped Out?

The first conversation is an opportunity to discuss your interest, current program availability, and whether the opportunity appears to be a reasonable fit. Contacting us does not obligate you to enter the program and does not guarantee acceptance.

Once You Start

Do I need to purchase plumbing tools before I start?

Do not assume you need to purchase a complete plumbing tool collection before entering the program. Any tools, clothing, equipment, or other items required to begin will be discussed before you start. The $500 tool award is provided upon successful program completion and should not be treated as a list of required starting equipment.

What will I be told before the first day?

Accepted apprentices should receive the practical information they need before beginning, including reporting instructions, required clothing or equipment, scheduling details, and any other current program requirements. Do not make assumptions about program logistics until those details have been confirmed directly with Tapped Out Plumbing and Backflow.

Will I see every type of plumbing job during the program?

Not necessarily. The program takes place around actual service plumbing, so the work you see depends on the real customer calls and plumbing problems that occur during your time in the program. Field experience is real rather than staged, which means no specific type or number of jobs can be guaranteed.

Will I be expected to perform plumbing work by myself?

No. The Trades Program is not permission to independently perform work that requires proper supervision, experience, or licensing. Apprentices work within the level of instruction and supervision appropriate to their experience and applicable requirements.

Think the Plumbing Trade Is Worth a Look?

Call or email the office and ask about current openings.

  • RMP 45090
  • BPAT 0023720
  • Family-Owned
  • 30+ Years of Experience